Everlube Lubricants

High performance resins are combined with lubricious pigments including PTFE, molybdenum disulphide and graphite, to provide a permanent protective layer. Formulations are heat cured or air drying depending on application requirements and available in solvent and water based compositions.

ADDEV Materials has years’ of experience in supporting the application of these products and can assist with the implementation in any process.

Brands

Everlube Products range includes the following well known brands:

• Everlube®
• Lube-Lok®
• Lubri-Bond®
• Ecoalube®
• Ever-Slik®
• Esnalube™
• Perma-Slik®
• Kal-Gard®
• Electrobond®
• Formkote®
• Henco-Mask™
• Electrolube®
• Evershield
• Henco-Phos

Metal to metal contact areas are prone to a variety of performance issues which can be improved by the use of Everlube solid film lubricants, these improvements include Wear resistance, Friction reduction, Galling reduction, Heat resistance, Fluid resistance, Corrosion resistance, Torque/tension reduction, Interference fit improvement, No dirt pick up and High load resistance.

Application is by spraying, dipping, brushing, spray/ tumbling or dip/tumbling. Most solid film coating lubricants achieve optimum wear properties when applied to a total thickness between 7 and 17 microns and when the lubricant is applied in very thin, multiple, uniform coats.

Applications

Everlube products are applied on mating surfaces in a wide variety of environments. Applications include – Pipe joints, O Rings, rivets, bolts, valves, actuators, aerospace components, engine components, turbine blade roots, armaments, strikers, springs and bearings.

Product Approvals, from a list of >2000